Text Box: Pulp & Paper CASE HISTORIES: Text Box: TEK-GRIP: Permanent Non-Skid Text Box: Black-Clawson Refiner Lid after Blast Cleaning Text Box: Same refiner lid—protected against Erosion/Corrosion Text Box: The grooves worn in this facility floor were PERMANENTLY repaired with TEK-SET “TEK-CRETE” - a true polymer concrete. Return to service within one shift! Text Box: Steam tracks on this GE Turbine—the steam packer heads are shown - were repaired rapidly with TEK-SET ENGINEER HT - (Hi-Temp) Text Box: The bearing on this 40’ agitator shaft had collapsed and undercut the shaft. Text Box: With no dis-assembly, the journal was rebuilt in-situ with NO machining! Back to go in one shift! Text Box: Yes! The gloss is great. The traction is great. Our Industrial Flooring is designed for long term performance under arduous conditions. Text Box: This “T” or spool piece was perforated - handling waste streams from the boiler feed water polishing plant. Rebuilt, coated and protected by TEK-SET Text Box: Paper Machine Head Box Throat - vital for smooth operation of the line, was resurfaced with TEK-SET “ULTRA-FLOW” - a low surface energy coating designed to be “slick” i.e. the stock slips off it a lot easier with less “sticktion” Text Box: This “Lagoon Regulator” had been bested by corrosion. Now protected with TEK-SET “TEK-TANK” - it should maintain its pristine appearance for years. Text Box: Groundwood PulpStones are subject to brutal stress. They are expensive, and a bear to change out. This papermill client was eager to protect and prolong the useful life of these stones. Looks like they are covered! TEK-SET “NM SiliCarb” is ideal for repair to the stone face as well - perhaps when a segment pops out or explodes. Takes a truing cut just like the stone itself. Text Box: This “Four-Cell” sand filter was rotting out. Totally Grit-Blasted to NACE-1 (SSPC-SP-5) rebuilt where necessary with TEK-SET “NM Build-UP” and protected overall with two coats of TEK-TANK, the owners can look forward to many years of trouble free service. Text Box: Wherever there is severe abrasion - for instance on Pulp Stones, Chip Augurs, De-barkers, etc. then there is definitely an application for TEK-SET NM SiliCarb. SiliCarb has been lauded across all industry groups as the foremost abrasion resistant material. Talk to your colleagues in your industry, those who have benefited from TEK-SET NM SiliCarb will avow its unparalleled performance. The extreme performance capabilities of Regular SiliCarb are even further enhanced in the Hi-Temp grade. This absolutely unique, proprietary material is cleared up to 7000F-7500F! The competitors and imitators in our field can not even come close!