Text Box: PRODUCTS: NOTE: NM = Non-Machineable! TEK-SET Offers a range of proprietary Novolac/Hybrid Epoxy Compounds reinforced with non-corroding alloys and/or abrasive fillers and/or lubricants, for normal and elevated temperature scenarios. The absolutely unique HI-TEMP range allows effective long term repairs in ambient conditions up to 7000F! Contains NO Phenol, NO MDA, or other undesirable chemicals. All our products are safe, easy to mix, and apply. METAL REPAIRS: TEK-SET SUPERFAST Extremely rapid-setting (3-5minutes at 750F) paste for instant bonding. Ideal for leak repairs. Superior mechanical properties, water resistance, and temperature resistance. Available 1lb. Units. TEK-SET ENGINEER Is the Engineer’s work-horse for repair of worn or damaged components. Sets in 20-30 minutes at 750F., is easily machined to close tolerances and specifications. Paste grade (thixotropic) spatula or trowel applied. 1lb., 3lb., and 10lb. (Contract Pack). Also available in HT - High Temperature TEK-SET FLUID Castable, pourable grade of ENGINEER for pattern and mold copying. 1lb., 3lb., and 10lb. TEK-SET “BMC” Bulk Molding Compound. Castable, pourable grade with low exotherm for large applications. Easy to drill, tap, shape and form. Ideal for mold-makers and pattern shops. In 5 gallon units. TEK-SET NM BUILD-UP Non-machineable paste grade with similar working characteristics to TEK-SET ENGINEER, but filled with highly abarasion-resistant alloys to rebuild and prevent wear from impingement, impact or erosion and corrosion. Very easy to mix and apply. 1lb., 3lb., and 10lb. Also available in HT - High Temperature. TEK-SET NM SURFACER Brushable grade of TEK-SET NM BUILD-UP. Two coats of 25 mils each will offer a highly abrasion-resistant coating. Ideal for surfaces subject to erosive, corrosive fluid flow environments. TEK-SET ULTRA-FLOW Brushable, low surface energy coating provides an extremely slick, abrasion resistant surface, packed with lubricants and proprietary surfactants to promote enhanced fluid flow. Ideal for pumps, condensers, sluices and water chests, hydro runners and pen-stocks. 1lb., 3lb., and 10lbs. TEK-SET SHIM For use wherever an irregular shim of high compressive strength is required—such as in grouting applications - crusher wear rings, engine bed-plates, deck machinery, pump pads, and bridge support structures. 10lb. Units. TEK-SET NM SILICARB No fuss thixotropic paste - stays where you put it - up to 1” thicknesses. Apply overhead or on vertical surfaces without primers or conditioners. Heavy buildup without slump. May even be applied by brush for conformal contouring. THE ULTIMATE world class abrasion resistant coating. NM SiliCarb out-performs ALL competitive/imitative products. TEK-SET Hi-TEMP Range: Any product identified as Hi-TEMP offers protection against heat, erosion, corrosion, and chemical attack in gas, fluid and solid state flow situations, where particulate matter combines with chemicals and elevated temperatures in the most aggressive environments. ABSOLUTELY NO EQUAL FROM ANY MANUFACTURER ANYWHERE IN THE WORLD! Conventional “epoxies” will cease to perform at their optimum around 3000F. or 1900F. immersed. TEK-SET HT products are cleared to 7000F. “dry” heat. Our soon to be released sister product should push immersed resistance to the 350-3750F. range!] NO CORROSIVES, NO HAZARD MARKINGS, NO TRANSPORTATION RESTRICTIONS! Available in ENGINEER, NM BUILD-UP, NM SURFACER, and NM SiliCarb versions. RUBBER REPAIRS: TEK-SET ELASTOMERS are proprietary formulations utilizing absolutely current Urethane Technology, with many innovative and unique features. Standard color is BLACK (Henry Ford again!), but available in a range of custom colors if desired. SHORE HARDNESS ranges from 10 on the “A” scale to 90 Shore “D”. 1lb., and 2lb. Units. Use of these Elastomers spans all industry groups, from Military to Marine, Mining and Quarrying, and everyday civil engineering applications. TEK-SET HI-TEMP ELASTOMERS: the Hi-TEMP Elastomers will accommodate in service temperatures of 5500F. With excursions to 6000F. TEK-SET TEK-CAST: A range of liquid, free-flowing room temperature curing, abrasion resistant elastomers for casting, pouring custom shapes and molds of complex design. Excellent reproduction characteristics. TEK-SET TEK-KOTE: A high-build coating grade at thicknesses of 25 mils per coat. Exceptional self-leveling with very high gloss finish, yet product will cover sharp edges without thinning. TEK-SET TEK-THIX: A trowel grade for applications requiring a build from 0.125” to in excess of 1.00” without slump. Extremely versatile in use; excellent as a gap-filling adhesive, or expansion joint material. Absolutely excellent performance for joining belting without vulcanizing. CONCRETE REPAIR: TEK-SET TEK-CRETE: High performance Epoxy Concrete repair material which resists abrasion, impact, and severe chemical attack. Easy to use, quick to apply, fast return to service. Extremely smooth surface and dense compaction achieved even at 0.25” Has true “feather-edge” capability. Custom colors available. 40lb. Pail. TEK-SET TEK-FILL: A bulk fill version where large voids or holes require filling prior to finishing with TEK-SET TEK-CRETE. Cures at same rate as TEK-CRETE. 40lb.pail. TEK-SET TEK-POLYCRETE: A true polymer concrete combining conventional aggregates with high performance monomers to offer extremely rapid curing concrete even below freezing. 60lb. Unit. TEK-SET TEK-PRUFE: This clear structural waterproofing material will not glaze or alter the appearance of concrete or stone, yet will protect the substrate with an internal micro-porous layer which penetrates the structure and lasts for years. CONTAINMENT: TEK-HAZ: The very best primary and secondary containment against aggressive chemical attack available today. Continual service under total immersion in 98% H2SO4 at elevated temperatures and pressures. Perfect for Hydrochloric, Hydrofluoric Acids, Sodium Hydroxide and countless other aggressive materials. Outstanding performance after post-cure. TEK-SET SUPERHAZ: The ultimate protection against the very nastiest chemicals in use. Oleum - H2SO7 and Fuming Sulfuric, Methylene Chloride, Tetrahydrofuran, Ethylene Dichloride, Acetone. TEK-SET TEK-TANK: developed to replace conventional coal-tar epoxies. Thixotropic, reinforced Epoxy coating for applications in excess of 25mils per coat for environments where little or no abrasion is involved. 2lb. And 8lb. Units. TEK-CLAD: A derivative of TEK-TANK for use in “Splash Zones” where intermittent contact with strong chemicals is likely. High gloss with good obliteration and opacity. 2lb. Units. TEK-GLAZE: Single component clear coating for the beautification and protection of wood, concrete, and metallic surfaces. Very high gloss. 2lb. Unit. TEK-LAMINATE: Two-pack coating where tough performance is required. Suitable for most substrates. 2lb. Unit. TEK-FLEK: A decorative and extremely chemical resistant floor and wall coating offering infinite color blending choice and extreme durability. Attractive system utilized by industrial, commercial and institutional facilities alike, where appearance and performance are required. TEK-ROOF: A derivative of TEK-LAG but with good UV stability, making this a really cost-effective alternative to out-dated conventional roofing systems. Seamless, micro-porous, fully reinforced with polyester mesh for application to more than just roofs: copings, gutters, glazing bars, and vertical glazing. SAFETY PRODUCTS: TEK-GRIP: Positive grip—truly permanent in service - with a wide range of attractive colors. Easy to apply in any format: solid, stripes, chevrons etc. Especially suited for both pedestrian AND heavy duty vehicular traffic, and application to conveyor drive rolls or head drums will offer long term positive traction. TEK-GLOWBRITE: Glows in the dark! Lasts ten times longer - is ten times brighter than conventional CuZn systems. Easy to install: brush on or aerosol spray to form any pattern needed. Permanent marking of escape routes and hazardous areas during emergencies. Totally safe: NO radiation; non toxic. Glows for hours longer than anything else available. TEK-ROLINE: Long term line marking. Extremely rapid cure and return to service within 30 minutes. Applied only by TEK-SET. ENERGY CONSERVATION: TEK-THERM: Unique to TEK-SET. Space-age product with NASA technology. Apply directly to hot or cold surface. A 0.125” coating will lower the temperature from a maximum of 4500F to around 1500F! Prevent heat transfer. Reduce condensation. Keep your metal-clad buildings warmer in winter, cooler in summer and quieter in the rain! An exceptional thermal barrier to prevent accidental contact with hot surfaces that might result in burns. 5 gal. pail. TEK-LAG: Seamless encapsulation membrane for protection of ALL types of insulation. No more aluminum cladding to flap in the wind. No more vinyl to split or gape at the seams. TEK-LAG will keep the water, oil and other contaminants OUT, so you can keep the heat (or cold) IN! 5 gal. pail.